Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen

Willkommen bei Digital Audio Service

Unsere Kategorien

EURE DIGITAL AUDIO SERVICE ANSPRECHPARTNER




Arnd Niemeyer

BERATUNG

RECORDING & VINTAGE

040/4711348-23

an@digitalaudioservice.de



Thomas Römann

SYSTEMTECHNIK

PROJEKTPLANUNG

040/4711348-20 / 0172/272 65 33

tr@digitalaudioservice.de



Arne Kohlscheen

REPARATURSERVICE

RMA - MAC - SUPPORT


ak@digitalaudioservice.de



Heiner Niemann

PROJEKTLEITUNG

BROADCAST

040/4711348-25 / 0173/59 55 015

hn@digitalaudioservice.de

  UNSERE ANGEBOTE


2 %
PSI Audio Sub A125-M
Features: Power: 225W Frequency Range: 28Hz – 100Hz SPL Max: 106dB 100% Analog – No DSP Flat frequency response Phase compensated for a better stereo image Class G Amplifiers Built in anti-resonance system in a double box cabinet individually calibrated Typical listening distance: from 1m Handmade in Switzerland

2.899,00 €* 2.969,00 €*
10 %
PSI Audio Active 14M Studio Metal Black
The PSI Audio A-14 M is the smallest member of the PSI Active Monitor Series. Despite its compact dimensions of the PSI Audio A-14 M a reliable reference for the evaluation of audio signals. The A-14 M PSI Audio üerträgt the entire frequency spectrum with a high sound üerraschend. The PSI Audio A M-14 has all the technologies of its "great Bruer," and is ideally suited fu studio use.Wherever high accuracy, small footprint and mobility are required.Key Data:Dimensions cabinet W x H x D mm : 163 x 243 x 170Gross / Net Weight : 6.2 / 5.5 kgResponse at -6dB : 56 - 22000 HzContinuous Max SPL, 1m : 101 dB (single)Program Max SPL, 1m : 112 dB (pair)Woofer's dim. Ext. / Diaphragm : Ø 147 mm / Ø 104 mm   Key Features: Protection circuits with overload indicator.Magnetically shielded for use close to video monitors.Metal handle for easy handling and for mic. stand or installation.Volume control on the front panel.Designed for stereo and multichannel monitoringOptimised directivity by phase coherency.Flat frequency response Real balanced input.CPR, AOI, ALG, PSC*For more information, please visit this products webpage.

1.299,00 €* 1.439,00 €*
17 %
Manley Massive Passive XXV
Seit seiner Veröffentlichung im Jahr 1998 hat der Manley Massive Passive den Klang unzähliger Produktionen auf der ganzen Welt veredelt. Zahlreiche renommierte Produzenten sowie Recording- und Mastering-Engineers aus aller Welt nutzen das Gerät, um ihren Produktionen einen eigenen Signature-Sound zu verleihen. Die XXV Anniversary Edition besitzt zur Feier des 25-jährigen Jubiläums des Massive Passive eine attraktive kobaltblaue Frontplatte mit eine speziellen Lasergravur und ist weltweit auf 100 Exemplare limitiert. Hochwertiges Schaltungsdesign mit passiven KomponentenWie gewohnt, wurden von Manley bei der Entwicklung des Massive Passive keine Mühen gescheut und keine unnötig komplizierten Schaltungen integriert – Massive Passive basiert auf passiven Komponenten und in der Klangbearbeitung kommen ausschließlich Metallschichtwiderstände, Folienkondensatoren und handgewickelte Spulen zum Einsatz. Aus diesem „natürlicheren“ Ansatzes resultiert auch ein natürlicher und organischere Klang. 2-Kanal 4-Band-EQ für das gesamte Spektrum von radikal bis subtilDer Massive Passive Equalizer liefert bei der drastischen Signalbearbeitung während der Aufnahme ebenso hervorragende Ergebnisse wie bei subtilsten Klangfärbungen für Gesangsspuren oder Gesamtmischungen. Obwohl es einen anderen Ansatz verfolgt bietet das 2-kanalige 4-Band-Design umfangreiche Bearbeitungsoptionen und kombiniert dabei die größten Vorteile der Pultec-EQs mit denen ausgewählter graphischer, parametrischer und Mischpult-EQs, ohne dabei das Audiosignal zu sehr zu verfremden. Ob kreative oder chirurgisch präzise Klangbearbeitung – der Manley Massive Passive holt aus jedem Signal das Beste heraus. Fünf Hoch- und vier Tiefpassfilter mit hoher FlankensteilheitDer Manley Massive Passive ist mit fünf Hoch- und vier Tiefpassfiltern bestückt, die sich einzeln oder gleichzeitig aktivieren lassen. Die Flankensteilheit der Filter ist hoch, damit störende Anteile eliminieren werden können, ohne das Musiksignal zu beeinträchtigen. Der EQ klingt auch in Kombination mit anderen Frequenzbändern hervorragend. Manley hat sich bei der Entwicklung des Massive Passive nicht auf etablierte Standards verlassen, sondern ausschließlich nützliche Funktionen integriert und macht mit diesem neuen Design-Ansatz wirklich massive Ergebnisse möglich. MANLEY POWER®-SchaltnetzteilDas MANLEY POWER®-Netzteil wurde unter der Leitung von Bruno Putzeys für Manley Labs entwickelt und ist speziell für die Verwendung mit Hochspannungsröhren und Audiosignalen optimiert. Es liefert zuverlässig alle für den Massive Passive nötigen Spannungen, wie die 300 V Röhrenspannung, die 6 V Heizspannung, Phantomspeisung und weitere Spannung für diskrete Schaltkreise. Diese herausragende Netzteil liefert die Grundlage für einen großen Dynamikumfang und "massive" Klangqualität. Alle Spannungen sind effizient reguliert und in Kombination mit geringen Leitungswiderständen optimal gegen Einstreuungen und Nebengeräusche aus dem Hochfrequenz-Netzteil geschützt. Das Universal-Schaltnetzteil akzeptiert jede Spannung und Frequenz und ermöglicht den Einsatz des Massive Passive weltweit ohne Anpassungen. Eigenschaften Limitierte Anniversary Edition des legendären Massive Passive Kobaltblaue Frontplatte mit Anniversary Lasergravur 4-Band Stereo Röhren-Equalizer Klangregelung in komplett passivem Schaltungsdesign Einzigartige Shelving-Kurven mit Bandbreiten-Steuerung Wahlweise überlappende oder getrennte Frequenzbereiche Für jedes Frequenzband Shelving- oder Glockencharakteristik wählbar Aufhol- und Ausgangsverstärker in Vollröhrentechnik Parallele, symmetrische Topologie Durchgängig hochwertige Bauteile Passive HP- und LP-Filter sowie Gain-Trim-Regler MANLEY POWER®-Schaltnetzteil

6.199,00 €* 7.459,00 €*
5 %
Neumann NDH 30 (B-Ware)
FEATURES Herausragende Linearität und Impulstreue Hohe räumliche Auflösung Klang- und Mix-Kompatibel mit Lautsprechern der KH-Line Hoher Langzeit-Tragekomfort Intern symmetrisches, stoffummanteltes Kabel (abnehmbar) Faltbar für leichten Transport

519,00 €* 545,00 €*
16 %
Mäag Audio PREQ2
MÄAG AUDIO’S NEWEST CREATION IS THE PREQ2™ DUAL MIC PREAMP WITH EQ, A COMPLETE ANALOG SYSTEM FOR EITHER RECORDING OR MIXING HOUSED IN A 1U STANDALONE UNIT. IT COMES WITH CLIFF MÄAG’S VENERABLE AIR BAND® SHELVING EQUALIZER FIRST INTRODUCED IN 1993 WITH HIS NTI EQ3 EQUALIZER. THE PREQ2 WILL HANDLE EITHER LINE OR MICROPHONE SIGNAL LEVELS WITH TWO MATCHED CHANNELS BOTH WITH SEPARATE REAR PANEL LINE LEVEL INPUT AND MICROPHONE XLR CONNECTORS AND SWITCHABLE +48-VOLT PHANTOM POWERING. THE REAR PANEL ALSO HAS XLR OUTPUT CONNECTORS FOR EACH CHANNEL AND A ON/OFF/FUSE MAINS SWITCH. ALL SWITCHES ON THE PREQ2 HAVE COLORFUL LEDS TO CONFIRM THEIR OPERATION AND ALL CONTROLS HAVE DETENTS WITH THE EXCEPTION OF THE CONTINUOUSLY VARIABLE MICROPHONE GAIN. MICROPHONE INPUTTHE MÄAG AUDIO PREQ2 MICROPHONE PREAMP HAS UP TO 71DB OF GAIN SPLIT BETWEEN A DISCRETE CLASS-A TRANSISTOR PREAMP ALONG WITH A LARGE, NICKEL-CORE MÄAG AUDIO-BUILT INPUT TRANSFORMER (ONE FOR EACH CHANNEL). THIS CIRCUIT OFFERS A CLEAN, DETAILED SOUND WITH +27DBU OF HEADROOM AND AN EIN NOISE LEVEL OF -128DB. THERE ARE TWO OPTIMIZED GAIN RANGES SELECTABLE ON THE FRONT PANEL. THE DEFAULT GAIN RANGE IS +20DB TO +42DB AND A +42 TO +71DB GAIN RANGE IN HIGH GAIN MODE USING THE FRONT PANEL’S 25DB GAIN SWITCH. MAXIMUM INPUT LEVEL IS +8DB. THE MICROPHONE INPUT SECTION HAS FRONT PANEL SWITCHES, LED INDICATORS AND BUTTONS FOR: +48-VOLT PHANTOM POWERING, -20DB ATTENUATION PAD, PLUS SIGNAL PRESENT, +26DBU PEAK LEDS, AND PHASE OR POLARITY FLIP. MICROPHONE GAIN IS CONTINUOUSLY ADJUSTABLE USING A SINGLE, LARGE MIC GAIN CONTROL KNOB. LINE INPUTTHE FRONT PANEL LINE SWITCH TOGGLES THE REAR PANEL XLR LINE INPUT CONNECTORS IN PLACE OF THE MICROPHONE PREAMP’S OUTPUT (AFTER THE INPUT TRANSFORMER AND MICROPHONE PREAMP). IT IS POSSIBLE TO KEEP BOTH A MICROPHONE AND A LINE LEVEL SOURCE ALWAYS CONNECTED TO THE PREQ2 AND TOGGLE BOTH CHANNELS SEPARATELY. YOU COULD HAVE ONE CHANNEL WORKING AS A MICROPHONE PREAMP CHANNEL AND THE OTHER AS A LINE LEVEL AMPLIFIER FOR RECORDING A DIRECT MUSICAL INSTRUMENT (BASS OR GUITAR) AT THE SAME TIME. BOTH MIC INPUT SECTIONS HAVE ¼-INCH TS JACKS FOR HIGH IMPEDANCE (1 MEGA-OHM) INSTRUMENT INPUT WITH A COMPANION ¼-INCH OUTPUT THRU JACK THAT SIMULTANEOUSLY PROVIDES AN ISOLATED, BUFFERED OUTPUT—A “COPY” OF THE INSTRUMENT INPUT SIGNAL AT UNITY GAIN. IN ADDITION TO PROVIDING AN UNBALANCED SIGNAL FOR RUNNING LONG LEADS OUT TO INSTRUMENT AMPLIFIERS IN THE STUDIO AND/OR STOMP PEDALS, FOR LIVE RE-AMPLIFYING THE THRU JACK’S OUTPUT SIGNAL IS ALSO ACTIVE WHEN USING THE XLR MICROPHONE INPUT. WHEN USING THE INSTRUMENT INPUT TS JACK, THE MÄAG AUDIO PREQ2 USES AN AUTOMATIC DETECTION CIRCUIT TO SWITCH (USING A RELAY) AND ROUTE THE UNBALANCED ¼-INCH INPUT SIGNAL TO THE MIC INPUT TRANSFORMER. THE IMPEDANCE IS LOWERED FOR A BETTER MATCH TO THE TRANSFORMER. THIS DETECTION CIRCUIT MAKES IT IS IMPOSSIBLE FOR THE 48-VOLT PHANTOM POWER TO EVER REACH THE ¼-INCH OR XLR LINE INPUT EVEN IF ALREADY TURNED ON. EQUALIZATION SECTIONSTHE MÄAG AUDIO PREQ2 HAS THREE EQUALIZER/FILTERS SECTIONS; THE LAYOUT AND CONTROL COMPLIMENT ARE IDENTICAL FOR BOTH CHANNELS. THE EQUALIZER DESIGN IS SPECIFICALLY DESIGNED FOR BOTH RECORDING AND/OR SUBTLE TOUCHUP TONALITY CHANGES AND EUPHONIC ENHANCEMENTS. ON THE LEFT SIDE OF THE CHANNEL IS THE FIRST CONTROL FOR THE 2ND ORDER, 12DB/OCTAVE HIGH PASS FILTER. IT IS FULLY VARIABLE USING A 21-DETENT CONTROL TO SWEEP FROM 20HZ TO 200HZ. IT HAS ITS OWN HARDWIRED, IN/OUT BYPASS SWITCH. NEXT IS THE LOW FREQUENCY BELL-SHAPED EQUALIZER SECTION WITH A BOOST (ONLY) CONTROL AT 6DB/OCTAVE. FREQUENCIES ARE SWITCHED USING A SIX POSITION ROTARY SWITCH AND ARE: 10HZ (SUB) SHELF, AND BELL-SHAPED CURVES FOR 40HZ, 65HZ, 100HZ, 125HZ, AND 165HZ. UP TO 9DB OF BOOST IS AVAILABLE. AIR BAND®THE THIRD BAND OF THE EQUALIZER IS THE MÄAG AUDIO AIR BAND SHELVING SECTION WITH 2.5, 5, 10, 15, 20, AND 40-KHZ FREQUENCY CHOICES WITH ITS OWN CONTROL AND UP TO 9DB OF MAXIMUM BOOST. BOTH THE AIR BAND AND LOW FREQUENCY EQUALIZERS SHARE A SINGLE BYPASS PUSH-BUTTON.

2.899,00 €* 3.450,00 €*
25 %
PSI Audio AVAA C214 Paar (B-Ware)
Paar (Versandrückäufer ohne Schäden)Die neue aktive Bassfalle AVAA C214 steht an der Seite ihres weltberühmten Geschwisters, der C20. Die innovative AVAA Technologie eliminiert Raummoden von 15 Hz bis 160 Hz, ohne dass eine Kalibrierung oder Abstimmung erforderlich ist. Das Ergebnis ist eine wesentlich sauberere Basswiedergabe in anspruchsvollen Hörumgebungen wie professionellen Studios oder audiophilen Umgebungen. Während C20 mit rein analoger Technologie arbeitet, nutzt C214 innovative digitale Technologie und verwendet kleinere Membranen für eine noch kompaktere Bauweise. Dank der Integration digitaler Technologie kann der AVAA C214 über eine App auf einem Smartphone oder Tablet gesteuert werden, was die hervorragende klangliche Leistung noch weiter verbessert.

5.200,00 €* 6.898,00 €*
5 %
Locomotive Audio 14B PCB
Locomotive Audio 14B printed circuit board version - A Vari-Mu Compressor That Will Make Your Vocal Sit Perfectly. The Real Sound of Vari-Mu Tube Compression at Your Fingertips. Just like its popular vintage inspirations, the Gates Sta-Level, UA 175B, RCA BA-6A and Collins 26U, the results are a sound that cannot be replicated with any other method of gain reduction. The Locomotive Audio 14B delivers! TRANSFORMERS Super premium  MuMetal shielded input and interstage transformersSPEED & TONE Fast UA 175B attack meets smooth Gates Sta-Level OutputLOW CUT FILTER Adjust & cut the low frequencies that trigger compressionSTEREO LINK Use the 14B aggressively on your stereo room mics and overheads or gently on your mix bus Features: Stereo Link switch Sidechain Low Cut filter control: Off and 70-350Hz Hard-wire bypass switch Compression turned off with full counterclockwise attack position, switching to line amplifier Two position Compress-Limit Switch Two position VU meter switch: Gain Reduction - Output 6BC8 balance adjustment on interior of unit Custom Sifam backlit VU meter XLR input and output connections Custom MuMetal shielded input and interstage transformers Custom output transformer Hand-built in USA Heavy 16 gauge steel chassis 115v/230v AC mains option on rear Lifetime warranty parts and labor

2.429,00 €* 2.559,00 €*
18 %
Neumann MT 48 (B-Ware)
VersandrückläuferThe MT 48 is an audio interface without compromise. With its huge dynamic range, superior converters, preamps and headphone amplifiers, it sets new standards in sound quality. Internal DSP power allows for monitor mixes with sophisticated EQ and dynamics processing – all intuitively controlled via touchscreen. Class-leading AD/DA converters with enormous dynamic range Intuitive touchscreen user interface DSP processing (EQ, dynamics, reverb) 4 independent mixers with integrated talkback  USB, ADAT and AES67 connectivity Contents: MT 48 Audio Interface Softcase EU Power Supply incl. USB-C connection cable USB-A data cable USB-C data cable Quick Guide Safety Guide

1.555,00 €* 1.888,00 €*
24 %
Lindell Audio LiN76
Tobias Lindell hat bereits mit seinen Modulen im 500er-Format bewiesen, dass er klassische Schaltungen clever in die Moderne überführen kann. Mit dem LiN76 wendet er dieses Talent auf einen berühmten FET-Kompressor an. Lindell Audio präsentiert mit dem LiN76 einen FET-Kompressor mit klassischem Sound. Der LiN76 ermöglicht das Regeln von Input, Output, Attack, Release sowie schaltbarer Ratio Dynamikkontrolle mit Vintage-Klang. Das große VU-Meter kann mit einem rückseitigen Regler kalibriert werden. Wie das Vorbild bietet auch der LiN76 den „All-Buttons-In“-Modus, der den Kompressor in einen Brickwall-Limiter mit besonders aggressivem Sound verwandelt. Hochwertige Bauteile und Übertrager aus US-Fertigung. Orientiert sich optisch & technisch am Vorbild. Aber mit modernen Bauteilen und aktualisierten Schaltungen. Große & hochwertige Regler für Input und Output. Kalibrierbares Vu-Meter mit Auskunft über Pegel oder Gain Reduction. Kompressionsverhältnis 4:1, 8:1, 12:1, 20:1. „All Buttons in Mode“ auch möglich. Attack: Frei einstellbar 20uS bis 800uS Release: Frei einstellbar 50mS bis 1200mS Höhe-Breite-Tiefe (in mm): 88(2U)-438(19‘)-250 Gewicht: 8kg

395,00 €* 519,00 €*
16 %
Warm Audio WA84-C-B-ST
Das WA-84 ist eine präzise Reproduktion des Industriestandard-Kondensatormikrofons mit kleiner Membran. Im Gegensatz zu modernen transformatorlosen Nachbildungen werden Vintage-Geräte für ihren satten und detaillierten Klang geschätzt, der weiche und dennoch detaillierte Höhen liefert. Wie das Original liefert das WA-84 den typischen SDC-Sound, auf den Künstler und Tontechniker bei legendären Aufnahmen von James Taylor, Fleetwood Mac, Paul Simon, Steve Gadd und vielen anderen vertrauen.Wie die originalen Vintage-Geräte liefert der WA-84 offene Klarheit mit starker Rauschunterdrückung. Im Gegensatz zu modernen Neuauflagen, bei denen der Transformator weggelassen und die Schaltung „aktualisiert“ wird, erfasst der WA-84 cremig weiche Höhen und den KRAFTVOLLEN mittleren bis unteren Bereich, der das Original zu der Studiolegende gemacht hat, die es ist. Die Class-A-Schaltung, der Premium-Transformator und das sorgfältige Design ermöglichen es dem WA-84, bei Aufführungen präzise Details mit professioneller Schallisolierung zu erfassen. Der leichte Abfall von 8 - 10 kHz / Anstieg von 11 - 20 kHz glättet harte Höhen, ohne dass die Brillanz verloren geht.

699,00 €* 829,00 €*
39 %
Heritage Audio Tubesessor
TUBESESSOR - Optical Tube Compressor The Heritage Audio TUBESESSOR is an optical tube compressor with an absolute sweet, warm and natural dynamic control possible, but also the possibility to spice up the sound up on occasion. Tube compression, especially based on an optical design, is generally considered to be warmer than VCA and FET designs, and it tends to provide a very pleasant, more natural, smoother result. This has made it the preferred choice for seasoned engineers and producers that want to provide a very transparent control over a signal while offering a hint of enhancement but keeping true to the original tone. For this very reason optical tube compressors are usually the first thing one reaches for when dealing with critical vocals and bass signals. The TUBESESSOR is the perfect option for this. Analog excellence is achieved by combining an all tube-based amplification stage with an outstanding UTC A10 input transformer replica by AMI, as well as a custom all-silicon steel output transformer. With an elevated internal operating voltage you can be sure the TUBESESSOR will heat up any signal while also maintaining its character and vibe. No starved plate circuits here! Never has dynamics control been so easily obtainable while at the same time so invisible. Even with generous amounts of gain reduction being applied anything processed with the TUBESESSOR still maintains its clarity and depth. Thanks to the TUBESESSOR´S three unit high front panel you´ll find plenty of room to adjust the large Herchild-style knobs making it a breeze to achieve the desired sound. No cramped spaces here, just plenty of space to easily and quickly adjust the settings to taste. Now, we all know it would not be a Heritage Audio product without our expertise and passion channeled into a couple key features that take the TUBESESSOR to another dimension. First of all, for those times when a bit more texture and bite is called for, there´s nothing better than a little saturation…or maybe a lot. The innovative TUBE SATURATION section takes full advantage of a creamy sounding NOS Raytheon double triode tube to add in just a pinch of aggression or fully transform the signal into something ready for war. It, importantly, works in tandem with the custom output transformer to produce the right harmonic content. There are 4 available settings that vary from CLASSIC, no saturation, all the way to HOT, a heavily treated signal. This feature alone opens up a ton of possibilities for drums and other instruments vastly expanding the TUBESESSOR´S uses. And thanks to Heritage Audio´s use of an audiophile-grade Psvane dual output triode in a totem pole configuration, a solid output stage is guaranteed all while allowing much higher headroom than other tube compressors, whether vintage or modern. Secondly, there are also five internal sidechain filter settings to choose from. This is the exact same filter section that helped the SUCCESSOR obtain its legendary status. Two of the options make sure the compressor is not being unfairly overpowered by lower frequencies and the other three are frequency specific options for extra creativity. Continuously adjustable ATTACK & RELEASE controls in addition to a FIXED mode and a combination of the two will provide all the necessary settings possible, allowing you to mold your signal exactly as you´d like. A huge, attractive custom VU meter for monitoring either Input, Output or Gain Reduction guarantees you´ll always be informed with a clear reading of exactly what is happening. Everything you could possibly require to achieve a top-notch professional recording. As is the case with other tube offerings from Heritage Audio, the company has sourced NOS tubes for a lifetime, making sure your investment is safe and sound. Features Optical Compression Detection All Tube-Based Amplification Stage Fully Transformer Balanced Input & Output Tube Saturation Section Large Friendly Interface Extensive Attack & Release Control 5 Built-In Sidechain Filtering Options Huge Informative VU Meter Built Like A Tank

1.799,00 €* 2.969,00 €*
3 %
Burl Audio B16 B4 Mic Pre
ENDLICH … BURL Audio ist stolz, die neue 4-Kanal-MIC/LINE-Eingangs-Tochterkarte B4 für die B80- und B16-MOTHERSHIPs vorstellen zu dürfen. Die B4 verfügt über den neuen BX6-Eingangstransformator, der für echte MIC/LINE-Eingangsimpedanz ausgelegt ist. Die B4 verfügt über eine kompromisslose analoge Klasse-A-Schaltung, gefolgt vom gleichen ADC, den wir im BAD8 verwenden. Mit einem einzigen B80-Gehäuse können 40 Eingangskanäle audiophiler MIC/LINE-Eingänge realisiert werden. Mit digitaler Steuerung und SoundGrid oder Dante ist das B80 MOTHERSHIP mit der B4 MIC/LINE-Tochterkarte die ultimative Stagebox in Studioqualität.

2.319,00 €* 2.389,00 €*
10 %
Buzz Audio VELOX
controls and functions DRIVE - turning it clock wise increases compression, which is way more sensible than counter clock wise!MAKEUP - variable control that adds up to 15dB gain after the compressor section to correct for lost level.MIX - variable control that allows you to mix between the input signal and the compressor output (post the makeup control).COMP IN - Push button switch to bypass or engage the compressor, (hard wire bypass).BASS - Push button switch that engages a high pass filter into the side chain to reduce the sensitivity of the compressor at low frequencies.METER G.R./O.P. - Push button switch to select the display on the VU meter of the amount of gain reduction or the output level.ATTACK - rotary switch with FAST (1mS) 25mS, 50mS selections plus our excellent AUTO mode.RELEASE - rotary switch selects recovery time of 100mS, 200mS, 400mS, 800mS, 1600mS and a superb AUTO mode.RATIO - rotary switch with 4 settings for depth of compression, 2:1, 5:1, 10:1, 20:1.There is also a handy power ON/OFF switch and a channel A/B LINK switch which soft links the sidechain circuit, useful when used on stereo mixes.

1.839,00 €* 2.049,00 €*
23 %
Universal Audio Apollo Twin X DUO Gen 2 Essentials+
Desktop 10 x 6 Thunderbolt Audio Interface mit zwei Unison Mikrofonvorverstärkern, Apollo X Gen 2 Audiowandlung der Eliteklasse, Auto-Gain, Apollo Monitor Correction, Bass Management, DUO Core DSP Plug-in Verarbeitung und Premium Software Suite für Mac oder Windows. HauptvorteileHör die nächste Generation der Audiowandlung mit dem größten Dynamikbereich und der geringsten Verzerrung aller Apollo ModelleErlebe Analog-Tones mit UnisonTM Preamps, mit denen Du in Echtzeit durch authentische Emulationen von Neve, API, Avalon, Manley, Fender und weiteren aufnehmen kannstGreif auf die gesamte Bibliothek von über 200+ UAD DSP und Native Plug-ins zu, darunter preisgekrönte Titel wie Capitol Chambers, Sound City Studios, EL8 Distressor, und weitere Mixe voller Selbstvertrauen in jedem Raum oder über Kopfhörer mit Apollo Monitor Correction powered by Sonarworks®* Verwende Auto-Gain, um Deine Pegel über mehrere Eingänge hinweg in Sekundenschnelle einzustellen und verpasse nie wieder einen Take.Hör alle Details im Low-End Bereich Deiner Mixe, indem Du einen Subwoofer zu Deinem Monitor-Setup hinzufügstRichte im Handumdrehen Cues mit niedriger Latenz, Plug-in Scenes und Immersive Audio Monitoring ein mit der UAD Console AppErhalte preisgekrönte UAD Plug-ins von Auto-Tune, Fairchild, Teletronix und weiteren im Wert von Tausenden von Euros mit einer Auswahl von Essentials+ oder Studio+ Editionen *Erscheint in Q4 2024, erfordert Apollo Monitor Correction Add-on und SoundID Reference Lizenzen, erhältlich unter http://sonarworks.com

998,00 €* 1.289,00 €*
11 %
Buzz Audio Tonic Equalizer Modul 500er Serie
Buzz Audio Tonic Equalizer Modul 500er SerieThe tonic offers 3 bands of equalisation with a versatile sweep midrange section and fixed two frequency high and low bands. The tonic also has a high pass filter utilizing another real choke. The signal path of the tonic is all True Class A discrete transistor with the output balanced via a Lundahl* LL1517 high spec transformer. The tonic is designed to fit into the popular API* 500 Series modular racks and requires a rack to function.The tonic high band is switchable bell or shelf and features two frequency settings of 5kHz and 11kHz. The low band is also switchable bell or shelf with two frequency setting at 120Hz and 60Hz with both bands providing +/- 15dB of boost and cut. Thanks to the use of passive choke based filters, users can expect a very tight sounding bottom end and glistening highs when applying boost with these two bands.The sweep "bell" midrange extends from 75Hz to 1500Hz (x1 mode) or 750Hz to 15000Hz (x10 mode). The midrange "Q" or bandwidth can be selected tight(ish) or broad and utilizes the Constant Amplitude Phase Shift (CAPS) filter circuit developed by Mr Steve Dove. +/-15dB of midrange boost and cut is available.The tonic 18dB/oct high pass filter is completely passive with two turn over frequencies (50Hz or 90Hz) selected by the user via jumpers on the circuit board. Completing the picture is the "OL" LED which illuminates when levels exceed +20dBu and the "BYP" switch which completely removes the tonic from the signal path.Rack CompatibilityThe tonic power consumption is higher than most other 500 series modules and this may stress some rack power supplies depending on what other modules are fitted. Please check the following list to see if it will work OK in your rack.API Lunchbox 6B - recommend only two tonic modules are fitted along with other modules.API 500VPR with L200PS - no problems.Atlas Pro Audio Revolver - no problems.OSA Power Rack & Track Pack - no problems if you have the 3 amp external power supply.B.A.E. 6 & 11 Slot Racks - not tested, check with B.A.E. for power capacity.Purple Audio Sweet 10 - recommend up to 6 tonic units in this rack along with other modules.API* 500VPR Series rack module format - plug in and play!Real choke based EQ offering superior sonics.Advanced analogue technology - not a clone or copy of products from the past.Fully discrete hi-bias wide bandwidth differential Class A amplifiers.High performance Lundahl* output transformer.Maximum Input Level = +23dBuMaximum Output Level = +26dBu into 3k ohm load.Frequency Response EQ set flat = 17Hz to 175kHz (+1dB, -3dB). Harmonic Distortion measured +10dBu output level= 0.08% @ 100Hz, 0.02% @ 1kHz, 0.005% @ 10kHz Signal to Noise Ratio = -88dB A wtg, input shorted. Input Impedance = 20k ohms approx balanced Indicators = Single LED overload indicator. Size = (37Wx132H). Fits 1 space in API* 500 series rack formatPower requirements = 120mA +/- 15-18 volts DC, as supplied by frame power supplyFor more information, please visit this products webpage

849,00 €* 949,00 €*
14 %
FLEA47 Vintage microphone - two heads combo (Limited Edition)
Limited Edition Set: enthält zusätzliche austauschbare F47 MikrofonkapselEigentlich ist dieses Mikrofon eine exakte Nachbildung des U47. Es ist mit der F7-Kapsel ausgestattet – unserer exakten Replik der M7-Kapsel, sowie unserem Nachbau des BV8-Transformators und TELEFUNKEN EF12 oder E80F Röhren. Diese Röhren sind die nächste Generation der EF12-Röhren, jedoch mit einer längeren Lebensdauer. Tatsächlich sind EF12, EF14, UF14 und VF14 die gleichen Röhren mit unterschiedlicher Heizung. Besonders konzentrieren wir uns auf die EF12-Röhre, da wir ihren Klangcharakter dem Original am nächsten finden. Natürlich hängt der Preis von der Art der Röhre ab. Wer sich mit Preisen auskennt, weiß, dass eine gute VF14-Röhre bis zu 1.500 € kosten kann, daher ist klar, dass dieses Mikrofon kein günstiges Produkt ist. Aber dieses Mikrofon ist für fast alles einsetzbar und klingt immer perfekt. Das Gehäuse besteht aus Duraluminium und ist vernickelt. Das Gitter ist in zwei Versionen erhältlich: glänzendes Chrom oder mattes Nickel. Das komplette Set besteht aus dem Mikrofon in einer Holzbox, einem Kabel, einer Stoßdämpferhalterung und einem Netzteil.

4.899,00 €* 5.699,00 €*
10 %
Buzz Audio SOC-M
mastering focusDue to popular demand we have released a mastering version of the SOC-20 optical compressor. The SOC-M mastering version replaces the DRIVE and GAIN pots of the SOC-20 with stepped Elma attenuators for repeatability. We have also adjusted the RATIO's to suit mastering tasks and all the ratio's feature our famous "soft knee" characteristic. The SOC-M signal path utilizes our Class A discrete BE41 transistor amplifiers powered by a special low impedance power supply for vibrant sonic detail. As standard, the SOC-M is fitted with a Lundahl LL1517 output transformer providing a nice sheen to the sound. The unit is also available with a transformerless output option. analog mid-side processingBut not only is the Buzz Audio SOC-M a stereo compressor, it also incorporates a Mid-Side (or sum and difference) encoder and decoder which is a very powerful mastering tool. When set to MS mode, signals that are common to left and right are processed by Channel A and the left to right difference signals by Channel B. Check out the SOC-20 audio samples to see how powerful this process can be. In addition, when set to MS mode, the mid and side signals are available as balanced outputs on the rear panel insert send XLR's side chain designAt the flick of a switch, a 12dB/octave high pass filter at 170Hz reduces the compressor sensitivity to low frequencies for more bass punch. We have also included a fully balanced side chain insert point so you can add additional equalisation to the compressor characteristic. The side chain monitor function allows you to hear what is returning into the insert point (the side chain) and you can also monitor the mid or side signals when the compressor is used in MS mode. dynamic range controlThe 5 ratio settings feature a soft knee characteristic whereby the selected ratio is only actually acheived at 10dB of gain reduction. Therefore very gentle compression is available when using 2:1 and 3:1 and even 10:1 is usable for material that needs stronger dynamic control. The unique differential side chain circuit of the SOC-M splits the audio into positive and negative waveform and processes it separately (attack and release parameters) with the resulting balanced signal controlling the Buzz Audio BE45 electro-optical attenuator. There are 5 compressor attack settings and 6 release settings that cover a wide range of response possibilities. In addition, our clever auto modes produce very musical results. The auto attack adapts to incoming audio rise time, and the auto release will decay quickly from short impulses but longer from sustained or low frequency signals. controls and functions DRIVE - 24 position Elma switch that sets the amount of compression. OUTPUT dB - 24 position Elma switch that adds gain at the output to correct for lost level. ATTACK - rotary switch with 1mS, 10mS, 25mS, 50mS selections and the excellent AUTO mode. RATIO - rotary switch with 2:1, 3:1, 4:1, 6:1 and 10:1 selections - all soft knee characteristic. RELEASE - rotary switch with 100mS, 200mS, 400mS, 800mS 1600mS selections and our superb AUTO mode. BYPASS - hard wire unit bypass to compare compressed and uncompressed signals. METER - switches the VU meter between input/output levels or amount of compression. S.C. HPF - inserts a 170Hz high pass filter into the side chain for added bass punch. S.C. INSERT - engage the external side chain insert point and monitor the side chain signal. LINK A/B - joins the side chain of each channel for stereo operation with "soft" tracking. There is also a locking toggle to select STEREO or MID-SIDE mode and a handy POWER on/off switch.

3.069,00 €* 3.419,00 €*
12 %
Pulse Techniques EQM-1A
Wie auf der Produktseite des EQP-1A beschrieben, war/ist der 3U EQP-1A eine verbesserte Version des ursprünglichen Pultec-Produkts EQP-1 aus dem Jahr 1953. Die Mastering-Version EQM-1A geht noch einen bedeutenden Schritt weiter, indem die BOOST/ATTEN-Potentiometer durch 21-stufige (und BW durch 11-stufige) ELMA-Schalter ersetzt werden, die mit präzisen Metallfilmwiderständen ausgestattet sind, um maßgeschneiderte Regelkurven für jede Steuerung zu erreichen. Das aktuelle Design implementiert unser "Full-Range, Progressive-Taper"-Design, das eine Präzision von 0,5 dB pro Schritt für die ersten 50 % der Drehung bietet und dann schrittweise größere (1 oder 2 dB) Schritte, wenn die Steuerung von 50 % auf 100 % der Drehung bewegt wird. Dies ermöglicht eine präzise Steuerung für subtile Equalization bei Mix-Bus- oder ähnlichen Anwendungen oder den vollen BOOST/ATTEN-Bereich von 18-20 dB der gepotteten Version beim Tracking oder Mischen einzelner Spuren. Darüber hinaus machen die gestuften Regler die Wiederherstellung der Einstellungen kinderleicht, und das präzise Tracking zwischen den Geräten ist unerlässlich für den Erhalt des Stereobildes, wenn ein Paar im Stereo-Mix-Bus verwendet wird.

5.119,00 €* 5.799,00 €*
10 %
Buzz Audio SOC-20
The design of the SOC-20 includes the unique Differential Drive Side Chain topology found in the SOC-1.1, This system ensures the compressor will never over compress and dig holes in your audio. The benefits of the DDSC have been well documented in our SOC-1.1 user comments - smooth and effortless analog compression is available at your finger tips.So what's actually new in the SOC-20? Well, we have added a side chain insert point to enable you to apply equalization and change how the compressor acts on a frequency basis. For example, cutting low and high frequencies in the side chain so only the vocal range is compressed on a stereo mix. A side chain monitor function allows you to hear what you are doing to the side chain signal. We have also included a set high pass filter in the side chain which reduces the compressor sensitivity at frequencies below 150Hz.Perhaps the most important SOC-20 feature is the stereo Mid/Side processing mode. At the flick of a switch a discrete Class A sum and difference circuit is enabled so that Channel A now processes the L+R (sum) signal and Channel B the L-R (difference) signal of your stereo mix. This function, along with the side chain insert point, opens up whole new ways to easily manipulate your mixes and achieve the sound you desire.Features:       Toasty Class A discrete signal path with flashy Lundahl output transformers.       On board Mid Side processor.       Side chain insert point on balanced XLR's.       Built in side chain high pass filter.       Fast attack optical compressor. Applications:       Music recording and mixing       Post production studios       Voice overs and dialog       Classical and acoustic music styles       Live sound Detailed specifications available soon. Standard Operating Level = +4dBu = 0 VU meter display. Size = 2 Unit 19" rack mount, (482Wx88Hx250D). Power requirements = 230V/115V selectable, IEC detachable power cable.  

2.459,00 €* 2.729,00 €*
10 %
Telefunken DC7 Drum Pack
Telefunken DC7 Drum Pack6-teiliges dynamisches Mikrofonpaket für Schlagzeug im Studio und auf der Bühne.Das TELEFUNKEN DC7 ist ein 7-teiliges dynamisches Mikrofonpaket für Schlagzeug im Studio und auf der Bühne. Die Mikrofone umfassen das M82 für die Kick Drum, das M80-SH für die Snare, drei M81-SH für die Toms und ein Paar M60 FET für die Overheads.1 x M82 mit Stativadapter1 x M80-SH mit Metall- und Kunststoffhalterung3 x M81-SH mit Metall- und Kunststoffhalterung2 x M60 FET mit Shockmount7 x XLR Kabel mit WinkelsteckerFlightcase

2.744,00 €* 3.049,00 €*
Loading...
Dateien werden hochgeladen, bitte warten...